Journal of Prosthodontics
Издатель: Wiley · ISSN 1059941X · 70 статей
-
Basic concepts of rotational path removable partial denture: A narrative review and case report
Abstract The rotational path removable partial denture (RPRPD) design is a viable treatment approach for the esthetic and functional rehabilitation of Kennedy's Classification III and IV partially edentulous patients. The purpose of...
-
Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques
Abstract Purpose The purpose of this in vitro study was to evaluate the effects of food‐simulating liquids (FSLs) on Martens parameters of heat‐polymerized (HP), subtractively manufactured (SM), and additively manufactured (AM) denture...
-
Effects of chemical and mechanical cleaning methods on the surface, physicochemical, and microbiological properties of extrinsically characterized 3D‐printed denture base resins after exposure to different pigmenting solutions
Abstract Purpose To investigate the effects of chemical and mechanical cleaning methods on the surface, physicochemical, optical, and microbiological properties of heat‐polymerized and extrinsically characterized 3D‐printed denture base...
-
A comparative assessment of ocular prostheses motility in patients with atrophia bulbi versus implanted anophthalmic sockets: A randomized controlled trial
Abstract Purpose This randomized controlled trial aimed to compare the motility and patient satisfaction of prefabricated versus custom‐made ocular prostheses in patients with atrophia bulbi and implanted anophthalmic sockets. Materials...
-
Biomechanical response of post‐restored maxillary lateral incisors under simulated lateral loading: A cone beam computed tomography and finite element analysis study
Abstract Purpose To characterize buccolingual root dimensions of maxillary lateral incisors using cone beam computed tomography (CBCT) and separately compare post restorations by finite element analysis (FEA) of one tooth geometry....
-
Accuracy of an innovative extraction socket–supported guide for immediate anterior implantation: An in vitro study
Abstract Purpose This study aimed to evaluate the accuracy of a root‐shaped extraction socket–supported guide (ESSG) for anterior single‐tooth immediate implant placement. Materials and Methods After the central incisors were digitally...
-
Relative transmitted‐dose reduction of 3D‐printed and elastomeric dental radiotherapy spacers at different thicknesses
ABSTRACT Purpose To evaluate the radiation dose reduction of different materials for intraoral radiotherapy prostheses and spacers with different thicknesses. Materials and Methods Three additively manufactured resins—KeySplint Hard...
-
Classic rotational path placement meets maxillofacial prosthodontic applications
Abstract The rotational path concept can extend beyond simple removable prosthodontics to include maxillofacial prosthetics. In addition to restoring oral continuity, esthetics, and phonetics, these prostheses can improve mastication,...
-
Digital quantification of intersegmental alveolar ridge distance in unilateral cleft lip and palate using intraoral scanning
Abstract Purpose To demonstrate the feasibility of a standardized digital workflow for quantifying intersegmental alveolar ridge distance in infants with unilateral cleft lip and palate (UCLP) undergoing presurgical infant orthopedic...
-
Retention and patient‐reported outcomes of low‐profile attachment system for mandibular overdentures: A crossover clinical trial comparing 3D‐printed and conventional dentures
Abstract Purpose This crossover clinical trial aimed to evaluate and compare the retention performance, attachment wear, and patient‑reported outcomes between a new low‐profile attachment system (EMI, JDEvolution) and a conventional...
-
Rotational path removable partial denture: The role of dental implants in enhancing outcomes for complex clinical cases
Abstract A rotational path removable partial denture (RPRPD) offers a significant esthetic advantage by minimizing or eliminating visible retentive clasps. The application has primarily been limited to tooth‐supported conditions. The...
-
Fit and fracture resistance of 3D‐printed single crowns made from highly translucent zirconia
ABSTRACT Purpose To compare the fit and fracture resistance of 3D‐printed and milled single crowns made from highly translucent zirconia (5Y‐PSZ) and to evaluate the influence of two debinding/presintering protocols. Materials and...
-
Impact of material type and acidic oral environment on physical properties and protein adsorption of subtractively and additively manufactured resin‐ceramics for definitive crowns
Abstract Purpose This study aimed to explore how material type and simulated acidic oral environment can affect the physical properties and protein adsorption of subtractively manufactured (SM) and additively manufactured (AM)...
-
Accuracy of complete‐arch implant impressions obtained with intraoral scanning, calibrated intraoral scan protocol, extraoral and intraoral photogrammetry, and conventional impression techniques: An in vitro study
Abstract Purpose To compare the accuracy of five techniques for complete‐arch implant impressions: conventional open‐tray splinted impression technique (CNV), direct intraoral scanning (IOS), calibrated intraoral scan protocol (CISP),...
-
Mechanical behavior and weight reduction of titanium frameworks with topology‐optimized lattice structures for implant‐supported prostheses
Abstract Purpose This study aimed to investigate the mechanical behavior of titanium frameworks with triply periodic minimal surface (TPMS) lattice structures designed for additive manufacturing by topology optimization for complete...
-
Clinical evaluation of porcelain‐veneered zirconia crowns with 3D‐printed textured cores: A preliminary randomized clinical trial
Abstract Purpose Porcelain‐veneered zirconia crowns (PVZCs) provide the opacity required to mask discolored substrates and translucency needed for a natural appearance. Although in vitro studies have demonstrated that...
-
Clinical performance of ultratranslucent monolithic zirconia posterior crowns compared with lithium disilicate crowns: A pilot, randomized, double‐blind, controlled clinical trial
Abstract Purpose To evaluate, through a pilot, randomized, double‐blind, controlled clinical trial, the clinical performance of ultratranslucent monolithic zirconia (UTZr) compared to lithium disilicate (LD) posterior crowns after 24...
-
Bond strength of vinyl polysiloxane tray adhesive to 3D‐printed tray materials: A comparison study
Abstract Purpose To understand the effectiveness of traditional vinyl polysiloxane (VPS) tray adhesive on 3D‐printed custom tray material. Materials and Methods Custom tray specimens were designed using Meshmixer (Meshmixer, San Rafael,...
-
Accuracy of complete‐arch implant positions recorded by analog impressions, intraoral scanning, and extraoral and intraoral photogrammetry
ABSTRACT Purpose The purpose of this in vitro study was to compare the accuracy of analog impressions, intraoral scanning, extraoral photogrammetry, and intraoral photogrammetry in recording complete‐arch implant positions. Materials...
-
Patient's denture assessment cutoff values for classifying denture‐treatment needs in removable complete denture wearers
Abstract Purpose To determine the patient's denture assessment (PDA) cutoff values for classifying treatment needs in patients wearing conventional complete dentures (CCDs) and implant‐retained overdentures (IODs). Materials and Methods...
-
An innovative approach for retreatment of prosthetically failing implant‐supported fixed prostheses with a complete digital workflow: A technique report
Abstract Complications in fixed implant prostheses are frequently encountered and can negatively impact patients' quality of life. This technique outlines a complete digital workflow for the remake of full‐mouth, implant‐supported,...
-
Posterior edentulous mandibular bone‐height change with implant‐supported fixed complete dentures: A systematic review and meta‐analysis
Abstract Purpose To investigate the amount of bone‐height change in the posterior edentulous mandible restored with full‐arch implant‐supported fixed complete dentures (FCDs). Methods A search was conducted in the Ovid MEDLINE, Embase,...
-
Relative accuracy of intraoral photogrammetry and intraoral scanning with conventional scan‐body for full‐arch implants
Abstract Purpose To compare the relative accuracy of intraoral photogrammetry (IPG) and intraoral scan (IOS) with conventional scan bodies (IOS‐CB) for complete‐arch implant impressions, using the conventional splinted open‐tray...
-
Effect of different cariostatic agents on the surface roughness and color change of CAD–CAM‐milled restorative materials: An in vitro comparative study
Abstract Purpose To evaluate the influence of different cariostatic agents: 38% silver diamine fluoride (SDF), 38% SDF + potassium iodide (RS), and nano silver fluoride (NSF) compared with distilled water (control), on the surface...
- Implant facilitated molar uprighting using CAD‐CAM technology
- A digital multifunctional device for creating an edentulous dynamic virtual patient: A dental technique
- Effects of various polishing processes on surface morphology, corrosion resistance, and RPD framework adaptation of SLM‐printed dental Co–Cr alloys
- The influence of shade guide presentation sequence and psychosocial factors on patient tooth shade selection: A three‐arm randomized controlled trial
- Complete‐arch implant rehabilitation and adjunctive orthognathic surgery of a patient with hypohidrotic ectodermal dysplasia utilizing a digital workflow: A clinical report
- Directional PICO framing and unsupported conclusions in prosthodontic systematic reviews: A methodological analysis