Rare Metals
Издатель: Wiley · ISSN 10010521 · 47 статей
-
From Atomic Dynamics to Device Reality: The Future of Functional Atomic Manufacturing
ABSTRACT The properties of a material are governed by its building units of atoms. When the structural dimensions of a material approach the scale of the single atom, its intrinsic characteristics often exhibit emergent and distinct...
-
High‐Efficiency Alkali‐Based Metallurgical Valorization of Hematite Concentrate Into High‐Performance LiFePO4 Cathodes
ABSTRACT Developing low‐cost and reactive iron sources is important for the sustainable production of LiFePO 4 (LFP) cathodes, yet the direct use of hematite concentrate (HC) is limited by impurity accumulation and insufficient...
-
In Situ Dual‐Coating Self‐Adaptively Regulates the Peri‐Implant Microenvironment for Immunomodulatory Osseointegration
ABSTRACT The clinical success of titanium (Ti) implants relies on establishing a favorable microenvironment to promote osseointegration. However, immune imbalance and metabolic dysregulation at the implant interface often trigger...
-
Parasitic Precipitation to Achieve Strength‐Ductility Synergy in Al0.3CoCrFeNi High‐Entropy Alloy
ABSTRACT The introduction of intermetallic phases into high‐entropy alloys (HEAs) frequently leads to embrittlement, primarily due to their inherent brittleness. Leveraging the remarkable hardness of these intermetallic phases while...
-
Transformation Enabled Strength Ductility Synergy in a Metastable Topologically Close Packed Alloy at Elevated Temperatures
ABSTRACT Topologically close packed (TCP) phases possess excellent thermal stability and high temperature strength, yet their intrinsic brittleness has long limited their application as structural materials. In this work, a metastable...
-
From Solvation Structure to Dendrite‐Free Deposition: A Discussion on the Spatially Anion‐Confined Electrolyte Strategy
Abstract Anode‐free sodium metal batteries (AFSBs) are regarded as a promising candidate for the next‐generation high‐specific‐energy storage systems due to their high energy density and simple preparation process. However, their...
-
Phosphate‐Mediated FeNi Cocatalyst Bonding on BiVO4 Photoanodes for Synergistic Interfacial Charge Separation and Surface Water Oxidation
ABSTRACT Bismuth vanadate (BiVO 4 ) has emerged as a promising photoanode for photoelectrochemical (PEC) water splitting, but its efficiency is severely limited by rapid charge recombination and sluggish water oxidation kinetics....
-
Scalable Synthesis of Pd‐CeO2‐TiO2@13X via a Novel Photothermal Fluidized Bed for VOCs Photothermal Mineralization
ABSTRACT In this study, we developed a novel photothermal fluidized bed (PTFB) for the fabrication of Pd‐CeO 2 ‐TiO 2 nanoparticles modified on 13X molecular sieves (PCT@13X). 13X powder impregnated with hydroxides and H 2 O 2 was used...
-
Interfacial Microstructure Reconstruction and Strengthening Mechanisms in Hot Deformation Bonding Joints of Ni‐Based Superalloys
ABSTRACT Hot deformation bonding (HDB) offers a promising approach to producing superalloy joints with base‐metal‐level strength, provided that interfacial microstructure is reconstructed through dynamic recrystallization (DRX). Current...
-
Cerium‐Enabled Synergy of Built‐In Electric Field and Lewis Acid Site for Enhancive Biomass Electrooxidation
ABSTRACT The lack of diverse active sites in single‐component catalysts inevitably leads to a competitive adsorption dilemma between 5‐hydroxymethylfurfural (HMF) and OH − , impeding the kinetics of electrocatalytic oxidation of HMF...
-
Tuned Magnetization Behavior to Promote Magnetic Softness at MHz Frequencies in Nanocrystalline Soft Magnetic Composites
ABSTRACT The rapid advancement of power electronics has created an urgent demand for high‐permeability, low‐loss soft magnetic materials to unlock the full potential of wide‐bandgap semiconductors and improve the efficiency of...
-
Low‐Temperature Solid‐State Sintering of High‐Strength and Electrically Conductive Silicon Carbide With Direct Current Flow and In Situ Graphitization
ABSTRACT Silicon carbide (SiC) is an ultra‐hard ceramic material and is intrinsically difficult to sinter. Pressureless solid‐state sintering (PS) typically requires high temperatures exceeding 2200°C and a prolonged heating cycle,...
-
Ultrasonic Spray Pyrolysis‐Derived LSCF‐GDC Nanocomposites as Durable Oxygen Electrodes for Solid Oxide Electrolysis Cells
ABSTRACT Solid oxide electrolysis cell (SOEC) technology is a promising route for efficient and clean green hydrogen production because of its high conversion efficiency and the use of precious‐metal‐free catalysts. However, developing...
-
Oxygen Vacancy‐Engineered CoFeMo‐LDHs Enables Dual‐Reaction Pathway Synergistic Enhancement of Nanozyme Activity for Intelligent Colorimetric Sensing
ABSTRACT Defect engineering plays a crucial role in regulating the active sites and reaction pathways of nanozymes. In this work, oxygen vacancies (Vo) were successfully introduced and stably regulated in ternary CoFeMo layered double...
-
Advances in High‐Temperature Microwave‐Absorbing Materials With Rare Metals: Preparations, Classifications, and Strategies
ABSTRACT High‐temperature microwave‐absorbing materials (HTMAMs) are vital for the electromagnetic stealth of hypersonic aircraft and aerospace engines. Traditional carbon‐based or magnetic‐based absorbers suffer from oxidation,...
-
Enhanced Microwave Attenuation via Coupled Ni3ZnC0.7/Ni3InC0.5 Heterogeneous Interfaces
ABSTRACT The growing complexity of electromagnetic environments places increasingly stringent demands on microwave absorbers, particularly regarding broadband attenuation, impedance matching in ultrathin configurations, and structural...
-
Liquid‐Induced Healing Enables High‐Performance Microlattice Metamaterials in Laser Powder Bed Fusion
ABSTRACT Laser powder bed fusion (LPBF) enables the fabrication of complex superalloy microlattice metamaterials, but internal defects and micro‐segregation severely impair their performance. While conventional hot isostatic pressing...
-
Progress and Future Prospect of Electrolyte Additives in Aqueous Zinc‐Ion Battery
ABSTRACT Aqueous zinc‐ion batteries (AZIBs) have been regarded as a strong candidate for a new generation of electrochemical energy storage systems because of their high safety, environmental friendliness, low cost and relatively high...
-
Achieving Strength–Ductility Synergy in a Near‐α Powder Metallurgy Titanium Alloy via Deformation‐Induced Nanoscale β Precipitation
ABSTRACT Powder metallurgy (PM) near‐α Ti alloys are often constrained by a pronounced strength–ductility trade‐off, due to the coarse lamellar microstructure formed during the sintering process. To address this issue, a...
-
Sb2S3 Nanorods Anchored on Lignite‐Derived Carbon With Strong C‐S Interfacial Coupling Enabling High Initial Coulombic Efficiency Sodium‐Ion Batteries
ABSTRACT Sb 2 S 3 is regarded as a promising anode for sodium‐ion batteries (SIBs) because of its high theoretical capacity and moderate working potential. However, it suffers from huge volume changes, poor conductivity, and excessive...
-
Advanced Characterization Techniques for Understanding Failure Mechanisms and Guiding Materials Design in Garnet‐Type Solid‐State Batteries
ABSTRACT Garnet‐type solid‐state electrolytes (SSEs) are widely regarded as key materials for high‐energy lithium‐ion solid‐state batteries (LSSBs), owing to their compatibility with lithium metal anodes and high‐voltage cathodes....
-
GHK‐Cu Delays Aging Through the Repair of Mitochondrial Dysfunction
ABSTRACT Althugh glycyl‐L‐histidyl‐L‐lysine copper (GHK‐Cu) shows antiaging potential, its precise molecular mechanisms remain unclear. Using Caenorhabditis elegans ( C. elegans ) as an in vivo aging model, we observed that GHK‐Cu...
-
Hierarchically Structured Zn‐ZnO@HA/PCL Biocompatible Coating: Enabling Controlled Degradation and Mechanical Stability of Magnesium Alloy Bone Implants
ABSTRACT Biodegradable magnesium alloys are limited in orthopedic applications due to their rapid corrosion and poor interfacial stability. In this work, a composite coating is constructed via magnetic filtered cathodic vacuum arc...
-
Phase Transition‐Induced Engineering of Fe‐N‐C Catalysts for Dual Optimization of Active Sites and Mass Transfer in Oxygen Reduction Reaction
ABSTRACT Fe‐N‐C electrocatalysts are considered promising alternatives to platinum‐based catalysts for advancing the development of metal–air batteries. However, the simultaneous realization of scalable synthesis, hierarchical...
-
Synergistic Electronic Modulation of 1T/2H Mixed‐Phase MoS2 via Phosphorus Insertion and Carbon Coating for Enhanced Acidic Hydrogen Evolution Kinetics
ABSTRACT MoS 2 is considered a promising electrocatalyst for the hydrogen evolution reaction (HER) because of its low cost and excellent stability. However, its practical application is severely limited by the scarcity of edge active...
-
Unlocking the Potential of Machine Learning for Advanced Single‐Atom Catalysts Design in Promoting Electrochemical CO2 Reduction
ABSTRACT Electrocatalytic CO 2 reduction reaction (CO 2 RR) represents a pivotal pathway for the promotion of carbon neutrality and the preparation of highly valuable chemicals. To improve the product selectivity and catalytic...
-
Photocatalytic Biomass Platform Molecule Conversion Coupled With Synergistic Hydrogen Production: Reaction Pathways, Catalyst Design, and Prospects
ABSTRACT The high‐value conversion of biomass platform molecules is a key pathway for substituting fossil resources with renewables and promoting sustainable green chemical manufacturing. However, conventional thermocatalytic processes...
-
Achieving Superior Strength–Ductility Synergy in an L12‐Type Ni3Al‐Based High‐Entropy Aluminide via Architecting Hierarchical Heterostructure
ABSTRACT Achieving excellent strength–ductility synergy remains a critical scientific challenge for ordered Ni 3 Al‐based intermetallic alloys. In this work, a hierarchical heterostructure was deliberately architected in a novel L1 2...
-
Gadolinium as an Emerging Contaminant: Environmental Cycling, Human and Plant Interactions, and Mitigation Strategies
ABSTRACT Gadolinium (Gd) is a rare earth element whose anthropogenic cycle has expanded rapidly, driven primarily by the widespread medical use of gadolinium‐based contrast agents (GBCAs) in magnetic resonance imaging, alongside its use...
-
Mixed‐Scale Powder Enables 3D Printing of Tungsten Alloy
ABSTRACT Laser powder bed fusion (LPBF) offers a promising route for manufacturing tungsten alloy components with complex geometries, whereas W–Ni–Fe alloys remain the most widely used tungsten alloys because of their excellent overall...