Физика конденсированного состояния
138 статей · 9 журналов
Журналы подкатегории (9)
- Materials Science in Semiconductor Processing · Elsevier (100)
- MRS Advances · Springer Nature (20)
- Rheologica Acta · Springer Nature (18)
- Discover Nano · Springer Nature (0)
- Korea-Australia Rheology Journal · Springer Nature (0)
- Materials Chemistry and Physics · Elsevier (0)
- Materials Letters: X · Elsevier (0)
- Materials Today Quantum · Elsevier (0)
- NPG Asia Materials · Springer Nature (0)
-
Nanoscale etching characteristics for controlled AFM tomography of amorphous chalcogenide thin films
Amorphous chalcogenide materials are of increasing interest for phase-change memory and threshold-switching device applications. However, the fast-switching behavior in the nanoscale regime is difficult to confirm and characterize in...
-
Microstructural characteristics of fifth-century Silla gilded artifacts from Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea
This study investigated the gilding microstructures and manufacturing techniques of a fifth-century Silla horse-harness fitting excavated from the grave-goods compartment of Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea. The specimen...
-
Monolithic fabrication of 1S1R cross-point device using single Ge x Te 1-x material by controlling composition between memory and threshold switching
Three-dimensional (3D) integrated one-selector one-resistor (1S1R) cross-point arrays are emerging as a leading next-generation memory technology. Achieving both nonvolatile memory switching and volatile threshold switching within a...
-
Selective facet stabilization of anatase TiO 2 by Sn doping
Anatase titanium dioxide (TiO 2 ) is widely recognized for its superior photocatalytic capabilities due to its indirect band gap, low cost, and high chemical stability compared to other oxide semiconductors. Despite its advantages, TiO...
-
Combustion Synthesis of W–Ni Alloy from Nickel Tungstate
Abstract Tungsten–nickel (W–Ni) alloys are promising materials for advanced structural and functional applications due to their unique combination of mechanical, thermal, and magnetic properties. However, their synthesis remains...
-
Spatial Unsteady Wave Regimes of Gasless Layer Combustion
Abstract Numerical simulation of unsteady spatial combustion in a thin layer of gasless composition was performed. In the unsteady regime, the influence of layer width on cellular combustion dynamics was analyzed, focusing on the number...
-
Combustion-Driven Formation of Fe–Ni Magnetic Materials
Abstract Achieving bulk nanocrystalline Fe–Ni-based alloys with controlled microstructure and magnetic performance still remains a major challenge. Here, we demonstrate a rapid, energy-efficient route to fabricate Fe 4 Al 4 Ni 8 B γ...
-
Self-Propagating High-Temperature Synthesis of Aluminum Oxynitride for Transparent Ceramics
Abstract Aluminum oxynitride (AlON) powders were prepared by self-propagating high-temperature synthesis (SHS) at nitrogen pressures from 0.5 to 8 MPa using magnesium perchlorate as an oxidizer to enhance combustion of Al–Al 2 O 3...
-
Co- and Mn-Doped ZnO Pigments Synthesized via Ginkgo Biloba Leaf-Assisted Self-Propagating Combustion: Structural and Optical Properties
ZnO-based pigments doped with Co and Mn ions were synthesized via a self-propagating combustion method using Gingko biloba leaves as a bio-derived fuel. Thermogravimetric analysis confirmed an effective combustion interaction between...
-
Temperature-Dependent Phase Stability in NbTaCrTi(Mo,Hf) Refractory High-Entropy Alloys
Abstract The high-temperature behavior of two refractory high-entropy alloys, Mo 24 Nb 25 Ta 12 Cr 23 Ti 16 and Nb 45 Ta 20 Hf 15 Ti 15 Cr 5 , was examined. Both materials exhibited strong thermal stability, preserving their bcc-based...
-
Solution Combustion Synthesis as a Route for the Preparation of Hydroxyapatite and Tricalcium Phosphates: A Review
Abstract Calcium phosphates (CPs) are biomaterials of significant interest in bone tissue engineering due to their close chemical and structural similarity to the inorganic component of natural bone. Among this family, hydroxyapatite...
-
Study of Reaction Front Propagation in Magnesiothermic Reduction of UF 4
Abstract Magnesiothermic reduction of uranium tetrafluoride (UF 4 ) is a self-propagating high-temperature process widely employed for uranium metal production. In this study, the influence of charge preheating temperature and ignition...
-
Starch-Assisted Gel-Combustion Synthesis of Nano α-Fe 2 O 3 and Its Catalytic Effect on Ammonium Nitrate Decomposition
Abstract Nano-sized α-Fe 2 O 3 powders were synthesized via a starch-assisted gel-combustion method. The effects of fuel type, equivalence ratio (Φ), and ammonium nitrate addition on phase formation and crystallite size were...
-
Imaging optimization of FIB cross sections for reliable porosity analysis of PEMFC cathode catalyst layers
Focused ion beam–scanning electron microscopy (FIB–SEM) was used to investigate the effects of acceleration voltage, beam current, and cryogenic conditions on the cross-sectional preparation of proton exchange membrane fuel cell (PEMFC)...
-
Local bandgap and optoelectronic measurement using monochromated STEM-VEELS: fundamentals, challenges, and recent advances
Optoelectronic characterization of local bandgap, dielectric response, and plasmon at the nanometer scale has become increasingly important for understanding and optimizing modern electronic, optoelectronic, and quantum materials....
-
Structural and electrical characterization of Hf 0.5 Zr 0.5 O 2 thin films crystallized by rapid thermal annealing
The effects of rapid thermal annealing (RTA) temperature on the structural and electrical properties of 10 nm-thick Hf 0.5 Zr 0.5 O 2 (HZO) thin films were investigated. Structural analyses revealed that the films remained largely...
-
Mixed-phase structural characterization of urchin-like CuO/Cu₂O nanostructures
In this study, urchin-like CuO/Cu₂O mixed-phase nanostructures were synthesized via a simple surfactant-assisted approach, where the surfactant regulated the nucleation and anisotropic growth, leading to a hierarchical morphology with...
-
Orientation microscopy study of cryogenic-temperature friction stir processed AA6xxx sheet: microstructure and second phase particles evolution
Cryogenic-temperature friction stir processing (CT-FSP) was performed on AA6xxx sheets at 600 RPM and 500 mm/min using in-process liquid N 2 cooling to investigate microstructure, precipitate evolution, and the resulting mechanical...
-
A critical review of chemical heterogeneity–driven microstructure control in steels
This paper reviews a recent microstructure control strategy for steels based on intentional chemical heterogeneity, referred to as “chemically heterogeneous steels” or “chemically patterned steels.” This approach introduces controlled...
-
Umbelliferone-induced recovery of postsynaptic density structure revealed by the reanalysis of public electron microscopy data
Public biological data repositories not only ensure research reproducibility and transparency but also enable new scientific discoveries that extend beyond the scope of original studies. A previously published study on umbelliferone...
-
Combustion-Synthesized Ferrimagnetic Spinel MnFe 2 O 4 with Enhanced Magnetic Response
Abstract Manganese ferrite (MnFe 2 O 4 ) is a technologically important soft ferrimagnetic spinel oxide with high saturation magnetization for magnetic and electronic devices. In this work, manganese ferrite (MnFe 2 O 4 ) nanoparticles...
-
Microstructural Evolution in TiC-Reinforced Entropy-Stabilized Alloys
Abstract TiC-reinforced entropy-stabilized composites were synthesized via self-propagating high-temperature synthesis (SHS) in the Ti–Mn–Co–Ni–Al–C system and consolidated using spark plasma sintering (SPS) technique. Thermodynamic...
-
SHS-Derived (CrTi)B 2 –NiMnAl Cast Composites for Protective Coating Fabrication
Abstract Cast Ti–Cr boride composites with a Ni–Al–Mn binder were prepared via high-temperature synthesis to develop high-performance surfacing electrodes. It was revealed that the burning velocity and phase composition/microstructure...
-
Combustion Front Propagation in a Layered Ti–C– x Cu System
Abstract Combustion wave dynamics were analyzed in a two-layer Ti–C–Cu system under SHS conditions. Utilizing equimolar Ti–C mixture with varying Cu amounts, the study showed that combustion temperatures surpassing the Cu liquidus drive...
-
Self-Propagating High-Temperature Synthesis of Fe–Mn–Si Alloy: Structure and Magnetic Properties
Abstract Fe 2 Mn 3 Si 3 -based alloy with minor cubic Heusler Fe 2 MnSi phase was prepared for the first time via self-propagating high-temperature synthesis. The reaction initiated at 668°C, reaching a maximum of 1115°C, indicating...
-
Self-Propagating High-Temperature Synthesis of Porous Hollow β-SiAlON Cylinder
Abstract In this study, porous hollow cylinders based on β-SiAlON were produced via self-propagating high-temperature synthesis (SHS). The synthesis process involved two stages: (1) the preliminary structuring of a powder mixture of...
-
Ultrasonic-Assisted Solution Combustion Synthesis of MgO Nanopowders: Microstructural Control and Functional Properties
Abstract Magnesium oxide (MgO) nanopowders were synthesized by an ultrasonic-assisted solution combustion synthesis route using magnesium nitrate as oxidizer and sucrose as fuel. The influence of ultrasonic pretreatment and...
-
Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures
Abstract This study examines the influence of mechanical activation (MA) and initial titanium powder properties on forced self-propagating high-temperature synthesis (SHS) compaction of Ti–C mixtures. MA of pure titanium powder...
-
Synthesis of Few-Layer Graphene via Solution Combustion Method from Sucrose
Abstract Solution combustion synthesis (SCS) to make few-layer graphene (FLG) from sucrose was demonstrated. Such a mass-producible and low-cost method is competitive as a candidate for industrial production of graphene. We used sucrose...
-
FPGA-based reconfigurable scanning and data acquisition system for scanning electron microscopy
We present an FPGA-based reconfigurable scanning and data acquisition system for scanning electron microscopy (SEM). Built on the Xilinx Artix-7 (XC7A35T), the system integrates dual-channel 14-bit DAC raster scan waveform generation,...