Инженерия (общая)
117 статей · 15 журналов
Журналы подкатегории (15)
- Journal of Engineering Research · Elsevier (97)
- Engineering Research · Springer Nature (20)
- Ain Shams Engineering Journal · Elsevier (0)
- Alexandria Engineering Journal · Elsevier (0)
- Chemical Engineering Journal: Engineered Materials · Elsevier (0)
- Chemical Engineering Journal: Green and Sustainable · Elsevier (0)
- Communications Engineering · Springer Nature (0)
- Computers & Fluids · Elsevier (0)
- Engineering Reports · Wiley (0)
- Journal of Engineering and Applied Science · Springer Nature (0)
- Journal of Zhejiang University-SCIENCE A · Springer Nature (0)
- Mathematical Methods in the Applied Sciences · Wiley (0)
- Precision Engineering · Elsevier (0)
- Production Engineering · Springer Nature (0)
- Results in Engineering · Elsevier (0)
-
CSFF-Net: Cross-Scale Feature Fusion and Multi-Scale Context Attention-Based Approach for Robust Polyp Segmentation
Colorectal cancer is a leading cause of cancer-related mortality worldwide, where early detection and removal of precancerous polyps during colonoscopy significantly reduce disease incidence. However, automated polyp segmentation...
-
GIS-Based Techno-Economic Screening of Off-Grid Renewable Hydrogen Micro-refueling Hubs Using a Hydrogen Demand Coverage Threshold
This study develops a GIS-based techno-economic screening framework for off-grid renewable hydrogen micro-refueling hubs in Saudi Arabia under a standardized vehicle refueling demand profile. Six renewable-energy configurations are...
-
EnViT: A Novel Enhanced Vision Transformer-Based Approach with Dynamic Attention for Deepfake Detection
The increasing sophistication of deepfake technology presents a critical challenge to digital media authenticity, requiring advanced detection frameworks capable of adapting to diverse manipulations. Traditional deepfake detection...
-
How Does the Viscosifying Ability of Xanthan Gum and HPAM Polymers Differ in Low- and High-Salinity Conditions?
HPAM and xanthan gum are the two common EOR polymers that generate viscosity through different mechanisms. The viscosity-generating capacity of these polymer solutions is affected by several factors, including polymer concentration and...
-
Purified Silica Extracted from Natural Sand via Chemical Processing Followed by Thermal Treatment for Photovoltaic Applications: A First Report on the Noufoudh Region (Saudi Arabia)
The development of efficient purification strategies for silica obtained from natural sand is an important step toward producing suitable silica precursor materials for photovoltaic-related applications. In this work, we investigate the...
-
Optimizing Vibrotactile Alerts for Driver Microsleep Prevention: A Systematic Review of Parameters and Effectiveness
Microsleep remains a primary catalyst for global road fatalities, necessitating the engineering of robust preventive interventions to enhance vehicle safety. Vibrotactile alerts offer a promising engineering solution to mitigating...
-
One-Dimensional Compression Characteristics and Cumulative Strain Model of Saturated Coastal Soft Clay under Vibratory Loading
The deformation mechanism of saturated coastal soft clay under vibratory loading differs from that under static loading, rendering traditional static‑based models unsuitable for computing soil layer deformation. Based on one‑dimensional...
-
Predefined-Time Super-Twisting Sliding Mode ADRC for High-Performance Heave Compensation in Marine Winches
The active heave compensation (AHC) system was crucial for maintaining the spatial stability of underwater payloads in deep-sea operations. However, under dynamic sea conditions, AHC frequently suffered from uncontrolled convergence...
-
Effect of Polymeric Coatings on the Deformation Behaviour of Low-Nickel Austenitic Stainless Steel in Air and Hydrogen Environments
The increasing use of hydrogen as a clean energy carrier has created a need for cost-effective structural materials with reliable resistance to hydrogen-assisted degradation. A key challenge is that high-nickel austenitic 316 stainless...
-
DFT and Sombor Topological Indices Analysis of Intermolecular Hydrogen Bonding in Substituted 2-Furaldehyde Semicarbazone Symmetric Cyclic Dimers
This study examines intermolecular hydrogen bonding (IMHB), a type of noncovalent interaction, in self-assembling dimers of 2-furaldehyde semicarbazone (FSC) and its derivatives using density functional theory (DFT). The influence of...
-
Removal of Vanadium and Nickel Ions from Iraqi Heavy Crude Oil Using a Novel Composite Kerosene–Zirconia Nanoparticles–Surfactant
The increasing reliance on heavy crude oil has heightened the need to reduce its metal content, particularly vanadium and nickel, which adversely affect refinery catalysts and operational efficiency. This study evaluates a...
-
Specific Energy Modulation and Performance Response of 18Ni300 Fabricated by Laser Metal Deposition
Specific energy (Es) is an important parameter for characterizing heat input in laser metal deposition (LMD); however, the relationships among heat input, deposition behavior, microstructure and defects, and mechanical response of...
-
AI-Assisted Random Forest Recurrent Regression for Optimal Polarization Mode Selection in Hybrid Polarized MIMO Channels Using Shared Dual-Feed Antenna with Orthogonal Ports
In this study, we propose an AI-assisted approach for the optimal selection of polarization mode combinations in hybrid-polarized (HP) multiple-input multiple-output (MIMO) channels under varying noise conditions. Current research lacks...
-
Energy-Aware Hybrid Neural Network and Finite-Time Sliding Mode Control for Efficient UAV Trajectory Tracking
This paper presents a novel energy-aware hybrid control strategy for unmanned aerial vehicles (UAVs), combining the strengths of Finite-Time Sliding-Mode Control (FTSMC) with a Radial Basis Function (RBF) Neural Network. The main...
-
Sustainable Surface Engineering of SS316L Using Room-Temperature Deposited Q-Diamond Coatings for Enhanced Durability
Stainless steel 316L (SS316L) is a low-carbon grade of austenitic stainless steel widely used in biomedical and industrial applications. However, it exhibits limited tribological durability under high contact stresses. In this study,...
-
Solar-Based Combined Cycle for Electricity, Oxygen, and Nitrogen Production Required for Shahrebabak Copper Complex
Oxygen and nitrogen are two crucial elements in the copper production process and are produced using a cryogenic air separation unit. These units, which are commonly located near large-scale metal production industries, are highly...
-
Exergy and Sustainability Analysis of an Ice Plant Employing Diamond Nanoparticle-Enhanced Eco-Friendly Refrigerants
The evolution of environmental policies, particularly under the Kyoto Protocol, has resulted in the extensive use of hydrofluorocarbon refrigerants in heating, air conditioning, and refrigeration systems. However, due to their high...
-
Lightweight and Interpretable Hybrid CNN-Transformer Model for Multiclass Breast Cancer Classification in Histopathological Images
Accurate and interpretable classification of breast cancer (BC) histopathological subtypes is vital for supporting clinical decision-making. This study aims to develop an efficient and explainable deep learning framework capable of...
-
Irreversibility Analysis of Magnetized Hybrid Nanofluid Stagnation Flow toward a Rotating Disk under Non-Uniform Quadratic Heat Generation
In this study, three-dimensional numerical simulation of unsteady fluid flow, heat transfer, entropy generation, and streamline topologies is presented for the flow over a rotating disk. The performance of a high-quality hybrid...
-
A Systematic Taxonomy and Performance Evaluation of Wall Shear Stress Measurement Techniques in Gas–Liquid Multiphase Flows
Wall shear stress is a fundamental parameter governing momentum transfer, pressure loss, interfacial dynamics, and material degradation in gas–liquid multiphase flows. Accurate quantification of WSS remains challenging due to transient...
-
Almost-Sure Lyapunov Stability of PSO-Based Social Consensus on the Neutrosophic Simplex via Doob Supermartingales
Publication date: Available online 28 September 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Bayram Arda KUŞ
-
Nonlinear dynamic behaviors of a cable-supported laminated composite beam based on the first-order shear deformation theory
Publication date: Available online 12 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Long Yang, Xiaoyang Su, Houjun Kang, Wei Zhang, Tong Hu, Yunyue Cong, Tao Liu
-
Fault Estimation and FTC Design for T-S Fuzzy Descriptor Systems with Sensor Faults
Publication date: Available online 12 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Xiaoyv Cuan, Liang Qiao
-
A Novel Resilient Dynamic Consensus Control Strategy for Multi-agent Systems with Sector-based Nonlinear Control Input under Stochastic DoS Attacks
Publication date: Available online 13 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Muhammad Rehan
-
Consensus and tracking consensus of multi-agent systems with matrix-weighted directed networks based on dynamic event-triggered and adaptive strategies
Publication date: Available online 14 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Yuedi Zhang, Kaien Liu, Zhijian Ji, Xiaotong Wang
-
Controllability of linear piecewise impulsive systems with state delays
Publication date: Available online 14 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Huiping Luo, JinRong Wang
-
A Scale-Aware Transformer Architecture for Multiscale PDEs
Publication date: Available online 14 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Pengyu Lai, Yixiao Chen, Dewu Yang, Rui Wang, Feng Wang, Hui Xu
-
Predictive Emergence in European Inflation Dynamics: A Partial Information Decomposition Approach
Publication date: Available online 15 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Emiliano Alvarez
-
Uniform large deviations for non-autonomous stochastic delay FitzHugh-Nagumo system on unbounded domains
Publication date: Available online 15 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Ying Wang, Jun Shen
-
The Riemann Problem and Stability of Solutions for a Four-Parameter Perturbation of the Simplified Magnetohydrodynamics Equations
Publication date: Available online 16 November 2026 Source: Communications in Nonlinear Science and Numerical Simulation Author(s): Nidhi, Rahul Kumar Chaturvedi, Anupam Sen